c дебагом, схему собрал, подключил, но прошиваться не хочет
пишет:
Boot&Mon. CheckSum OK!
[SFLASH_InitFLASH][NG]
[ POWER ON Booting... ]
Press any key to execute Monitor Program within 1 sec...
Kernel Data Read Start From Serial Flash
New kernel was found...
CHKSUM
{
check sum start address : 41000000, count : 001B0000
check sum : 0000A5A5
} /* Checksum End
Checksum OK!!
Kernel Data Read End
Find Compressed Kernel
Kernel UnZip Done!!
jump to 0x40080000
ramsize= 406BFFFF, gsbsize = 40501204, FreeMemPtr = 40500548, FreeMemStart = 40
500548
<<< Reelase Mode >>>
<<<LogMsg_PrintOff>>>
Model Code : SCX3200
Main Kernel F/W Version : V3.00.01.08
Main Kernel F/W Date : OCT-18-2010
Check PowerOn Mode PBA Port ---- ( GPIO3In - 0x2daff, GPIOIn - 0xef )
DRAM:>
################### Normal Mode Start##########################
Boot&Mon. CheckSum OK!
[SFLASH_InitFLASH][NG]
[ POWER ON Booting... ]
Press any key to execute Monitor Program within 1 sec...
<CPU:375Mhz RAM:166Mhz SysClk:125Mhz DDR2>
----------------------------------------------------------------
START-UP MODE : Monitor Program
Boot into pROBE+ like stand-alone mode
[Type 'help' to see command info.]
Version : Ver.1.18 (BlueMT) 2010-10-15
----------------------------------------------------------------
Do you want to download from external port?[N] : n
pROBE+> fl
Upgrade Flash ROM Image
[SFLASH_InitFLASH][NG]
FlashCheckSum
{
check sum start address : 40060000, count : 00014FFE
check sum : 0000A5A5
} /* Checksum End
==> Now program restarted on the RAM to program flash ROM(0x40060000)
jump to 0x40060000
Flash Data Download Address : 0x40100000
===============================
Start flash_writer
===============================
[SFLASH_InitFLASH][NG]
verify_Image : 0x40100000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00000000
model : 0x00000000
flash type : 0x00000000
image type : 0x00000000
temp_buf :
SIG :
Can not find sig
----------- Display Dcache Status ------------
Control register = 0x000510F8
Icahe : ON
Dcahe : OFF
MMU : OFF
Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x40100000)
-------------------------
Samsung OTG, 2006
Link ID : [00000000]
-------------------------
Drv "design ware core" USB download
